Industry's Most Compact All-In-One Actuator - NOW AC POWERED!
By combining the latest electronic power technology with advanced thermal management modeling technology, Exlar's has set a new benchmark for electric actuator performance versus size. The new Tritex II^TM Series actuators integrate an AC powered servo drive, digital position controller, brushless motor and linear actuator in one elegant, compact, sealed package. Now you can distribute motion control and solve your application with one integrated device. Simply connect AC pwer, I/O, communications and go!

Dramatically Reduce Space Requirements
Tritex II electric actuators are the highest power density, smallest footprint servo drive devices on the market. Finally, you can incorporate a fully electronic solution in the space of your existing hydraulic or pneumatic cylinder. You can also eliminate troublesome ball screw actuators. And the space previously consumed by panel mount servo drives and motion controllers is no longer needed. Tritex II actuators may also reduce the size of your machine deign while offering significant reliability improvement.

Reduce Costs
Because the new AC powered Tritex II houses the servo drive, digital positioner, and actuator all in one convenient package, you eliminate the labor costs for mounting and wiring the panels. Cable costs are also significantly reduced by elminating the need for expensive, high-maintenance specialty servo cables. All that is required is an economical standard AC power cord, and standard communication cable for digital and analog I/O.

Also elminated are the issues associated with power signals and feedback signals traveling long distances from servo drive to servo motor. With the Tritex II, the servo drive and motor are always integrated in the same housing.

No Compromises on Power, Performance or Reliability
With forces to approximately 4000 pounds (18kN) continuous and 10,000 pounds peak (44 kN), and speeds to 33 in/sec (800 mm/sec), the AC Tritex II linear acuators also offer a benefit that no other integrated product offers - POWER! No longer are you limited to trivial amounts of force, or speeds so slow that many motion applications are not possible. And the new Tritex II with AC power electronics operates with maximum reliability over a broad range of ambient temperatures; -40 degrees C to +65 degrees C.

The AC powered Tritex II actuators contain a 1.5 kW servo amplifier and a very capable motion controller. With standard features such as analog following for position, compound moves, move chaining and individual force/torque control for each move, the Tritex II Series is the ideal solution for most motion applications.

Flexible Communications
Multiple feedback types, including absolute feedback, allow you to select the system that is best-suited for your application. Digital and analog I/O plus popular communication networks such as Modbus, Ethernet IP, HART, Modbus TCPIP, CAN Open and CAN J1939 allow the Tritex II to become an integral part of your control architecture or machine control processes.

Linear Applications
Tritex II linear actuators employ Exlar's patented, inverted roller screw mechanism for converting rotary motion to highly robust and long-life linear motion. These characteristics enable the Tritex actuator to solve applications that previously required pneumatic or hydraulic cylinders. No additional mechanisms (such as acme or ball screws) are necessary to convert the actuator's rotary power into linear motion in order to move the load. In addition, the Tritex II software allows you to create a sequence which causes the actuator, when commanded, to move forward while pressing an object into position. You can establish a preporgrammed force which triggers an event (such as stopping or retracting to another position) or it can maintain tha force level until commanded otherwise. This sequence is ideal for assembly, test, fastening and pressing applications. The Tritex II linear actuator can be programmed to follow an analog command signal, making it ideal for controlling valves and dampers in process applications.

Tritex II Models
• T2M standard mechanical capacity actuator, 90 and 115 mm frame
• T2X high mechanical capacity actuator, 90 and 115 mm frame

Power Requirements
• AC Power 100V - 240V, +/-10%, single phase
• Built-in AC line filter
• Connections for external braking resistor

Feedback Types
• Analog Hall
• Incremental encoder with 8192 count resolution
• Absolute Feedback

Communications & I/O
Digital I/O:
• 8 digital inputs
- 10 to 30 VDC opto-isolated
• 4 digital outputs
- 30 VDC maximum, 100 mA, opto-isolated
Analog I/O:
• 1 analog input
- +/- 10V mode
- 12 bit resolution
- Force/torque, velocity, position
• 1 analog output
- 0-10V or +10V/-10V, 12 bit resolution
- Force/torque, velocity, position
• Optional isolated 4-20mA board
- 1 4-20 mA isolated analog input
- 1 4-20 mA isolated analog output
- 16 bit resolution
Standard Communications:
• 1 RS 485 port, Modbus RTU, opto-isolated for programming, controlling and monitoring

General Product Information
Tritex II Actuator Operation
Expert User Interface
Speed vs. Force Curves
Performance Specifications
Dimensions (Imperial and Metric)
Accessories and Cables
Ordering Guide T2M/X Actuators
Download Brochure pdf file
Download Technical Reference Note - Compare Features of Tritex II to Tritex
Download Instruction Manual
Tritex II Rotary Motors and Gearmotors

Communication with Other Devices
Tritex Modbus Protocol Specification
Tritex II Modbus ID Table
Download Tritex with Panasonic GT01 HMI
Download Tritex II with Proface HMI

Software
Download Expert Software