| AAA = Roller Screw Type |
F = Screw Diameter |
| PRS = Ground thread, stationary rollers |
Specify in mm from the specifications table |
| B = Nut Type |
G = Screw Lead Specify in mm from the specifications table |
| 1 = Single Nut |
H = Lead Direction |
| 2 = Split (preloaded) nut |
R = Right hand thread |
| 3 = Double nut |
I = Lead Accuracy |
| C = Nut Flange Style |
1 = G1 |
| N = Standard nut; no flange |
3 = G3 |
| E = Standard nut; end flange |
4 = G4 |
| C = Standard nut; center flange |
5 = G5 |
| X = Non-standard nuts |
Lead accuracy definitions in Roller Screw Overview |
| D = Flange Hole Pattern |
JJJJ = Screw Length |
| 0 = No Flange |
Total screw length in millimeters |
| 1 = Type 1 |
KKKK = Threaded Length |
| 2 = Type 2 |
Total threaded length in millimeters |
| 3 = Type 3 |
00000 = Part Number |
| X = Special |
Factory assigned part number for specific roller screw configuration |
| E = Wipers |
|
| 0 = No Wipers |
|
| W = Wipers installed at both nut ends |
|
