| Actuator Series |
GGG = Motor Mount Provisions |
| IM = Standard Mechanical Grade, IP54 |
A## = Alpha numeric motor call out - contact Exlar Applications Engineering Department. Motor not included. |
| IX = Premium Mechanical Grade, IP65 |
NMT = No motor mount - keyed shaft on base unit only |
| AA = Actuator Frame Size |
N23 = Nema 23 standard dimension |
| 20 = 2 inch nominal frame actuator |
N34 = Nema 34 standard dimension |
| 30 = 3 inch nominal frame actuator |
N42 = Nema 42 standard dimension |
| 40 = 4 inch nominal frame actuator |
N56 = Nema 56 standard dimension |
| BB = Stroke Length |
M60 = Metric 60mm Exlar standard dimension. Motor not included. Not available on I40. |
| 02-18 = 2 to 18 inches (12" max on I20) |
M90 = Metric 90mm Exlar standard dimension. Motor not included. |
| 6 and 12 inch strokes for express delivery. All other increments according to standard published lead times. Special available strokes: Maximum 24 inch stroke is available for the I 30 and maximum 22 inch stroke for the I 40. These maximum stroke lengths are preferred stroke lengths over 18 inches and available in shorter lead times. |
M11 = Metric 115mm Exlar standard dimension. Motor not included. Available on I40 only. |
| CC = Lead (linear motion per screw revolution) |
AB3,4 = Allen Bradley 3 & 4 inch motors |
| 01 = 0.1 inch |
BD3,4 = Baldor 3 & 4 inch motors |
| 02 = 0.2 inch |
CE3,4 = Parker (Custom Servo Motors) Imperial 3 & 4 inch motors |
| 04 = 0.4 inch |
CM3,4 = Parker (Custom Servo Motors) Metric 3 & 4 inch motors |
| 05 = 0.5 inch (I30 and I40 only) |
EE3,4 = Emerson EMC Imperial 3 & 4 inch motors |
| 08 = 0.75 inch (I40 only) |
EM3,4 = Emerson CT Metric 3 & 4 inch motors |
| D = Mounting Options |
FA4 = Fanuc 4 inch motors. |
| N = None, Base Unit |
IN3,4 = Bosch-Rexroth (Indramat) 3 & 4 inch motors |
| F = Front flange |
KM2,4 = Kollmorgen 2, 3 & 4 inch motors |
| X = Special |
MT3,4 = Mitsubishi 3 & 4 inch motors |
| E = Rod End Options |
PS3,4 = Pacific Scientific PMA/PMB Series 3 & 4 inch motors |
| M = Male, US standard thread |
PC2,3 = Parker Compumotor 2.7, 3.6, 4.5 & 5.6 inch motors |
| A = Male metric |
YS3,4 = Yaskawa 3 & 4 inch motors |
| F = Female US standard |
MXX = Unlisted or special motor mounting provisions to be assigned an alpha numeric code at time of order |
| B = Female metric |
XX..XX = Travel and Housing Options (Multiple selections possible) |
| X = Special (please specify) |
EN = Electroless nickel plating of housing parts |
| F = Motor Mounting Provisions |
HC = Hard coat anodized, acceptable for food grade |
| NMT = Drive Shaft Only, No Motor Mount |
PB = Protective bellows |
| G05 = Inline planetary gearing, 5:1 ratio |
L1 = One external limit switch, channel mount magnetic sensing proximity switch N.O. |
| G10 = Inline planetary gearing, 10:1 ratio |
L2 = Two external limit switches, channel mount magnetic sensing proximity switch N.C. 10-30 VDC |
| ISC = Inline, includes shaft coupling |
L3 = Three external limit switches, channel mount magnetic sensing proximity switch 1 N.C., 2 N.O. 10-30 VDC |
| P10 = Parallel, 1:1 ratio |
L# = external limit switches, channel mount magnetic sensing proximity switch |
| P20 = Parallel, 2:1 ratio |
P5 = IP65 sealed housing |
| P## = Custom ratio - (ex. P13 = 1.3:1 ratio) |
PF = Pre-loaded follower |
|
SS = Stainless steel housing |
|
XH = Special housing option |
|
XL = Special lubrication |
|
XT = Special travel option |
|
##### = Part No. Designator for Specials |
|
Optional 5 digit assigned part number to designate unique model numbers |
