Exlar

Login | Register
Home
Tritexgroup_normal

Tritex Linear Actuator

TLM20 - 2 inch frame, 1100 lb peak force

Close ⊗
Backlash in (mm) .008 (.20)
Lead Accuracy in/ft (mm/300 mm) .001 (.025)
Maximum Radial Load lb (N) 15 (67)
Environmental Rating: Std
IP54 / IP65 Optional

Stator 1 Stack 1B8-50 2 Stack 2B8-34 3 Stack 3B8-25
Lead
RPM at 48 VDC* 5000 3400 2500
0.1 Stall Force lbf (N) 239 (1063) 377 (1677) N/A
Max Speed in/sec (mm/sec) 8.33 (212) 5.66 (144) N/A
0.2 Stall Force lbf (N) 119 (529) 188 (836) 251 (1117)
Max Speed in/sec (mm/sec) 16.66 (424) 11.33 (288) 8.33 (212)
0.4 Stall Force lbf (N) 60 (267) 94 (418) 126 (560)
Max Speed in/sec (mm/sec) 33.33 (848) 22.66 (575) 16.33 (424)
Power Supply Current Draw at Rated Power Amps 10 10 10
Resolution 0.001 revolution x lead
Accuracy (not including backlash) +/- 0.005 revolution x lead
Stroke Length in (mm) 3 (75) 6 (150) 10 (254) 12 (300)
Apprioximate Weight lbm (kg) 7 (3.2) 8.5 (3.9) 10 (4.5) 11.5 (5.2)

TLM30 - 3 inch frame, 2500 lb peak force

Close ⊗
Backlash in (mm) .008 (.20)
Lead Accuracy in/ft (mm/300 mm) .001 (.025)
Maximum Radial Load lb (N) 20 (90)
Environmental Rating: Std
IP54 / IP65 Optional

Stator 1 Stack 1B8-20 2 Stack 2B8-13 3 Stack 3B8-10
Lead
RPM at 48 VDC* 2000 1300 1000
0.1 Stall Force lbf (N) 585 (2606) 935 (4159) N/A
Max Speed in/sec (mm/sec) 3.33 (84.6) 2.17 (55.1) N/A
0.2 Stall Force lbf (N) 293 (1303) 468 (2082) 625 (2780)
Max Speed in/sec (mm/sec) 6.67 (169.4) 4.33 (109.9) 3.33 (84.6)
0.5 Stall Force lbf (N) 117 (520) 187 (832) 250 (1112)
Max Speed in/sec (mm/sec) 16.67 (423.4) 10.83 (275.1) 8.33 (211.6)
Power Supply Current Draw at Rated Power Amps 10 10 10
Resolution 0.001 revolution x lead
Accuracy (not including backlash) +/- 0.005 revolution x lead
Stroke Length in (mm) 3 (75) 6 (150) 10 (254) 12 (300) 18 (450)
Approximate Weight lbm (kg) 10 (4.5) 12 (5.4) 19.5 (8.8) 21 (9.5) 25.5 (11.6)
* RPM @ 24 VDC = 1/2 of listed value

TSM20 - 2 inch frame, 1150 lb peak force

Close ⊗
Backlash in (mm) .008 (.20)
Lead Accuracy in/ft (mm/300 mm) .001 (.025)
Maximum Radial Load lb (N) 15 (67)
Environmental Rating: Std
IP54 / IP65 Optional

Stator 1 Stack 1B8-50 2 Stack 2B8-34 3 Stack 3B8-25


RPM at 48 VDC* 5000 3400 2500
Lead Ambient Temp Degrees C 25 40 55 25 40 55 25 40 55
0.1 Stall Force lbf (N) 295
(1312)		 262
(1165)		 227
(1010)		 460
(2046)		 411
(1828)		 355
(1579)		 N/A N/A N/A
Max Speed in/sec (mm/sec) 8.33 (212) 5.66 (144) N/A
0.2 Stall Force lbf (N) 148
(658)		 131
(583)		 113
(503)		 230
(1023)		 205
(912)		 177
(787)		 288
(1281)		 257
(1143)		 223
(992)
Max Speed in/sec (mm/sec) 16.66 (424) 11.33 (288) 8.33 (212)
0.4 Stall Force lbf (N) 74
(329)		 66
(294)		 57
(254)		 92
(409)		 82
(365)		 71
(316)		 115
(512)		 103
(458)		 89
(396)
Max Speed in/sec (mm/sec) 33.33 (848) 22.66 (575) 16.33 (424)
Power Supply Current Draw at Rated Power Amps 10 10 10
Resolution 0.001 revolution x lead
Accuracy (not including backlash) +/- 0.005 revolution x lead
Stroke Length in (mm) 3
(75)		 6
(150)		 10
(254)		 12
(300)
Apprioximate Weight lbm (kg) 7
(3.2)		 8.5
(3.9)		 10
(4.5)		 11.5
(5.2)

TSM30 - 3 inch frame, 3100 lb peak force

Close ⊗
Backlash in (mm) .008 (.20)
Lead Accuracy in/ft (mm/300 mm) .001 (.025)
Maximum Radial Load lb (N) 20 (90)
Environmental Rating: Std
IP54 / IP65 Optional

Stator 1 Stack 1B8-20 2 Stack 2B8-13 3 Stack 3B8-10


RPM at 48 VDC* 2000 1300 1000
Lead Ambient Temp Degrees C 25 40 55 25 40 55 25 40 55
0.1 Stall Force lbf (N) 756
(3362)		 686
(3051)		 608
(2704)		 1201
(5342)		 1091
(4853)		 968
(4306)		 N/A N/A N/A
Max Speed in/sec (mm/sec) 3.33 (84.6) 2.17 (55.1) N/A
0.2 Stall Force lbf (N) 378
(1681)		 343
(1526)		 304
(1352)		 600
(2669)		 545
(2425)		 484
(2153)		 772
(3434)		 702
(3123)		 623
(2771)
Max Speed in/sec (mm/sec) 6.67 (169.4) 4.33 (109.9) 3.33 (84.6)
0.5 Stall Force lbf (N) 151
(672)		 137
(609)		 122
(543)		 240
(1068)		 218
(970)		 194
(862)		 309
(1375)		 281
(1250)		 249
(1108)
Max Speed in/sec (mm/sec) 16.67 (423.4) 10.83 (275.1) 8.33 (211.6)
Power Supply Current Draw at Rated Power Amps 15
12
10
 15
12
10
 15
12
10
Resolution 0.001 revolution x lead
Accuracy (not including backlash) +/- 0.005 revolution x lead
Stroke Length in (mm) 3
(75)		 6
(150)		 10
(254)		 12
(300)		 18
(450)
Apprioximate Weight lbm (kg) 10
(4.5)		 12
(5.4)		 19.5
(8.8)		 21
(9.5)		 25.5
(11.6)

TRA500 - Remote Amplifier

Close ⊗
TRA500 Remote Amplifier Specifications
Input Voltage, Bus and Logic 24-48 Volts DC nominal, 20-60 Volts continuous operating range. Under-voltage trip 19V, over-voltage trip 85V
I/O Power Supply 24V nominal, 30V max, 12V min
Digital Inputs 8 opto-isolated, 24V nominal 30V max, programmable functions
Digital Outputs 4 opto-isolated 50 mA continuous, 24V nominal 30V max, short circuit protected, programmable functions
Analog Input 0-10 Volts or 0-20 mAmps, differential input 12 bit resolution, programmable as position, velocity or torque command
Analog Output 0-20 mAmps, 11 bit resolution, programmable functions
Serial Interface RS-485, Modbus RTU protocol, max baud rate 38.4k
Commutation SInusoidal, 15kHz PWM
Feedback Analog Hall
Continuous Output Current (Peak of Sine Amps)* 25o C Ambient 40o C Ambient 55o C Ambient
Stall Rated Stall Rated Stall Rated
15 15 14 12 12 8.5
Peak Output Current (Peak of sine Amps) 20
Environmental IP65, Humidity: 10 to 95%, non-condensing
*Actual output current may be reduced if the motor/actuator continuous and peak current ratings are lower

Other Products

Tritex Linear Actuator

Ordering Guide

TLM Ordering Information (See table below for TSM)
AAABB-CCDD-EFG-HHH-HH - (XX..XX - #####)
AAA = Actuator Type G = Rod End
TLM = Tritex Linear Actuator M = Male US Standard Thread
BB = Actuator Frame Size A = Male Metric
20 = 2 inch (50 mm) F = Female US Standard Thread
30 = 3 inch (75 mm) B = Female Metric
CC = Stroke Length (nominal) X = Special (please specify)
03 = 3 inch (75 mm) HHH-HH = Motor Stator
06 = 6 inch (150 mm) TLM20
10 = 10 inch (250 mm) 1B8-50 = 1 stack, 5000 rpm at 48 VDC, 2500 rpm at 24 VDC
12 = 12 inch (305 mm) 2B8-34 = 2 stack, 3400 rpm at 48 VDC, 1700 rpm at 24 VDC
14 = 14 inch (355 mm) (TLM30 only) 3B8-25 = 3 stack, 2500 rpm at 48 VDC, 1250 rpm at 24 VDC (N/A in 3 inch stroke actuator)
18 = 18 inch (455 mm) (TLM30 only) TLM30
DD = Lead (linear motion per screw revolution) 1B8-20 = 1 stack, 2000 rpm at 48 VDC, 1000 rpm at 24 VDC
01 = 0.1 inch (2.54 mm) 2B8-13 = 2 stack, 1300 rpm at 48 VDC, 650 rpm at 24 VDC
02 = 0.2 inch (5.08 mm) 3B8-10 = 3 stack, 1000 rpm at 48 VDC, 500 rpm at 24 VDC (N/A in 3 inch stroke actuator)
04 = 0.4 inch (10.16 mm) (TLM20 only) X..XX = Travel and Housing Options (Multiple Possible)
05 = 0.5 inch (12.7 mm) (TLM30 only) Travel Options
E = Connector Options AR = External Anti-rotate
I = Exlar Std M23 style connetor PF = Preloaded Follower *
Bxx = Embedded leads RB = Rear Brake (future option)
Jxx = Embedded leads with receptacle, std M23 style connector, xx = ft, 3 ft std. L1/2/3 = External Limit Switches
X = Special (please specify) XT = Special Travel Options
F = Mounting Housing Options
C = Rear Clevis P5 = IP65 sealed housing
D = Double Side Mount Special Motor Options
E = Extended Tie Rod XL = Special Lubrication Option
M = Metric Extended Tie Rod XM = Special Motor Option
F = Front Flange ##### = Part Number Designator for Specials
S = Side Mount Optional 5 digit assigned PN to designate unique model numbers
T = Side Trunnion  
X = Special  
* The dynamic load rating of zero backlash, preloaded screws is 63% of the dynamic load rating of the standard non-preloaded screws. The calculated travel life of a preloaded screw will be 25% of the calculated travel life of the same size and lead of a non-preloaded screw.

TSM Ordering Information (Requires Remote Amplifier)
AAABB-CCDD-EFG-HHH-HH - (XX..XX - #####)
AAA = Actuator Type G = Rod End
TSM = Tritex Linear Actuator Used with TRA500 Remote Amplifier M = Male US Standard Thread
BB = Actuator Frame Size A = Male Metric
20 = 2 inch (50 mm) F = Female US Standard Thread
30 = 3 inch (75 mm) B = Female Metric
CC = Stroke Length X = Special (please specify)
03 = 3 inch (75 mm) HHH-HH = Motor Stator
06 = 6 inch (150 mm) TSM20
10 = 10 inch (254 mm) 1B8-50 = 1 stack, 5000 rpm at 48 VDC, 2500 rpm at 24 VDC
12 = 12 inch (305 mm) 2B8-34 = 2 stack, 3400 rpm at 48 VDC, 1700 rpm at 24 VDC
14 = 14 inch (355 mm) (TSM30 only) 3B8-25 = 3 stack, 2500 rpm at 48 VDC, 1250 rpm at 24 VDC (N/A in 3 inch stroke actuator)
18 = 18 inch (457 mm) (TSM30 only) TSM30
DD = Lead (linear motion per screw revolution) 1B8-20 = 1 stack, 2000 rpm at 48 VDC, 1000 rpm at 24 VDC
01 = 0.1 inch (2.54 mm) 2B8-13 = 2 stack, 1300 rpm at 48 VDC, 650 rpm at 24 VDC
02 = 0.2 inch (5.08 mm) 3B8-10 = 3 stack, 1000 rpm at 48 VDC, 500 rpm at 24 VDC (N/A in 3 inch stroke actuator)
04 = 0.4 inch (10.16 mm) (TSM20 only) X..XX = Travel and Housing Options (Multiple Possible)
05 = 0.5 inch 12.7 mm) (TSM30 only) Travel Options
E = Connector Options AR = External Anti-rotate
I = Exlar Std M23 style connetor PF = Preloaded Follower *
J3 = Emb. leads w/recept, std M23, 3 ft
J6 = Emb. leads w/recept, std M23, 6 ft		 RB = Rear Brake (future option)
X = Special (please specify) L1/2/3 = External Limit Switches
F = Mounting XT = Special Travel Options
C = Rear Clevis Housing Options
D = Double Side Mount P5 = IP65 sealed housing
E = Extended Tie Rod Special Motor Options
M = Metric Extended Tie Rod XL = Special Lubrication Option
F = Front Flange XM = Special Motor Option
S = Side Mount ##### = Part Number Designator for Specials
T = Side Trunnion Optional 5 digit assigned PN to designate unique model numbers
X = Special  
* The dynamic load rating of zero backlash, preloaded screws is 63% of the dynamic load rating of the standard non-preloaded screws. The calculated travel life of a preloaded screw will be 25% of the calculated travel life of the same size and lead of a non-preloaded screw.