I Series Actuators
IM/X20 -
Close ⊗
| I Series Model (xx=stroke in inches) |
Nominal Frame Size Inch (mm) |
Screw Lead Inch (mm) |
Force at 1 Million Inches (25.4 Million mm) of Travel lbf (kN) |
Speed at Max Rated RPM in/sec (mm/sec) |
Dynamic Load Rating lbf (N) |
Max Allowable Input Torque lbf-in (N-m) |
Force at Max Allowable Input Torque lbf (kN) | Max Rated Input RPM |
|---|---|---|---|---|---|---|---|---|
| IM20-xx01 | 2 (51) |
0.1 (2.54) |
827 (3.7) |
8.33 (212) |
1782 (7927) |
14.9 (1.7) |
749 (3.3) |
5000 |
| IM20-xx02 | 2 (51) |
0.2 (5.08) |
681 (3.0) |
16.67 (423) |
1165 (5182) |
23 (2.6) |
578 (2.6) |
5000 |
| IM20-xx04 | 2 (51) |
0.4 (10.16) |
513 (2.3) |
33.33 (847) |
696 (3096) |
23 (2.6) |
289 (1.3) |
5000 |
| IX20-xx01 | 2 (51) |
0.1 (2.54) |
1146 (5.1) |
8.33 (212) |
2470 (10987) |
23 (2.6) |
1156 (5.1) |
5000 |
| IX20-xx02 | 2 (51) |
0.2 (5.08) |
1329 (5.9) |
16.67 (423) |
2273 (10111) |
30.6 (3.5) |
769 (3.4) |
5000 |
| IX20-xx04 | 2 (51) |
0.4 (10.16) |
1000 (4.4) |
33.33 (847) |
1357 (6036) |
30.6 (3.5) |
385 (1.7) |
5000 |
| IM 20 / IX 20 | |
|
Nominal Backlash inch (mm)
|
.008 (.2) / .004 (.1) |
|
Lead Accuracy in/ft (mm/300mm)
|
.001 (.025) |
|
Maximum Radial Load lb (N)
|
25 (111) |
|
Environmental Rating: Standard
|
IP54S / IP65S |
| Weights | lb (kg) |
|
Base Unit - Zero Stroke
|
2.32 (1.1) |
|
Adder per inch of stroke
|
0.33 (.15) |
|
Adder for inline (excluding motor)
|
0.73 (.33) |
|
Adder for gearset
|
1.63 (.74) |
|
Adder for front flange
|
0.44 (.2) |
|
Adder for parallel drive (excluding motor)
|
2.53 (1.15) |
|
Adder for 2 trunnions
|
2.12 (.96) |
|
Adder for 2 side mounts
|
1.75 (.79) |
|
Adder for 2 adjustable flanges
|
1.46 (.66) |
|
**For Nema motor size matching actuator size (I40 adder for Nema 34 = 7.3)
|
|
|
*For Nema motor size matching actuator size
|
|
| lbf-in-sec2 (kg-cm2) | |
| Base Unit - Input Drive Shaft Only | 0.0001 + 0.0000047/in (0.11 + 0.0053/in) |
| Inline Unit - w/Motor Collar Clamp | 0.00013 + 0.0000047/in (0.14 + 0.0053/in) |
| 5:1 Gearhead - w/Motor Collar Clamp | 0.000062 + 0.00000019/in (0.07 + 0.00021/in) |
| 10:1 Gearhead - w/Motor Collar Clamp | 0.000056 + 0.000000047/in (0.063 + 0.000053/in) |
| 1:1 Reduction Parallel Drive | 0.00046 + 0.0000047/in (0.52 + 0.0053/in) |
| 2:1 Reduction Parallel Drive | 0.00048 + 0.0000012/in (0.54 + 0.0013/in) |
| 1:2 Speed Up Ratio Parallel Drive | 0.0015 + 0.000019/in (1.7 + 0.021/in) |
IM/X30 -
Close ⊗
| I Series Model (xx=stroke in inches) |
Nominal Frame Size Inch (mm) |
Screw Lead Inch (mm) |
Force at 1 Million Inches (25.4 Million mm) of Travel lbf (kN) |
Speed at Max Rated RPM in/sec (mm/sec) |
Dynamic Load Rating lbf (N) |
Max Allowable Input Torque lbf-in (N-m) |
Force at Max Allowable Input Torque lbf (kN) | Max Rated Input RPM |
|---|---|---|---|---|---|---|---|---|
| IM30-xx01 | 3 (76) |
0.1 (2.54) |
1716 (7.6) |
6.67 (169) |
3697 (16445) |
32.2 (3.6) |
1619 (7.2) |
4000 |
| IM30-xx02 | 3 (76) |
0.2 (5.08) |
1289 (5.7) |
13.33 (338) |
2204 (9804) |
53.6 (6.1) |
1347 (6.0) |
4000 |
| IM30-xx05 | 3 (76) |
0.5 (12.7) |
1891 (8.4) |
33.33 (846) |
2383 (10600) |
53.6 (6.1) |
539 (2.4) |
4000 |
| IX30-xx01 | 3 (76) |
0.1 (2.54) |
2378 (10.6) |
6.67 (169) |
5124 (22793) |
53.6 (6.1) |
2694 (12.0) |
4000 |
| IX30-xx02 | 3 (76) |
0.2 (5.08) |
2515 (11.2) |
13.33 (338) |
4300 (19127) |
72.0 (8.1) |
1810 (8.0) |
4000 |
| IX30-xx05 | 3 (76) |
0.5 (12.7) |
3690 (16.4) |
33.33 (846) |
4649 (10600) |
72.0 (8.1) |
724 (3.2) |
4000 |
| IM 30 / IX 30 | |
|
Nominal Backlash inch (mm)
|
.008 (.2) / .004 (.1) |
|
Lead Accuracy in/ft (mm/300mm)
|
.001 (.025) |
|
Maximum Radial Load lb (N)
|
35 (155) |
|
Environmental Rating: Standard
|
IP54S / IP65S |
| Weights | lb (kg) |
|
Base Unit - Zero Stroke
|
5.29 (2.4) |
|
Adder per inch of stroke
|
0.63 (.3) |
|
Adder for inline (excluding motor)
|
0.98 (.44) |
|
Adder for gearset
|
3.32 (1.5) |
|
Adder for front flange
|
1.74 (.79) |
|
Adder for parallel drive (excluding motor)
|
2.51 (1.14) |
|
Adder for 2 trunnions
|
2.12 (.96) |
|
Adder for 2 side mounts
|
1.75 (.79) |
|
Adder for 2 adjustable flanges
|
2.24 (1.02) |
|
**For Nema motor size matching actuator size (I40 adder for Nema 34 = 7.3)
|
|
|
*For Nema motor size matching actuator size
|
|
| lbf-in-sec2 (kg-cm2) | |
| Base Unit - Input Drive Shaft Only | 0.00043 + 0.000023/in (0.487 + 0.0256/in) |
| Inline Unit - w/Motor Collar Clamp | 0.00053 + 0.000023/in (0.596 + 0.0256/in) |
| 5:1 Gearhead - w/Motor Collar Clamp | 0.00023 + 0.000001/in (0.254 + 0.001/in) |
| 10:1 Gearhead - w/Motor Collar Clamp | 0.00020 + 0.0000003/in (0.23 + 0.00026/in) |
| 1:1 Reduction Parallel Drive | 0.00075 + 0.000023/in (0.845 + 0.0256/in) |
| 2:1 Reduction Parallel Drive | 0.00046 + 0.0000057/in (0.52 + 0.0256/in) |
| 1:2 Speed Up Ratio Parallel Drive | 0.003 + 0.000091/in (3.4 + 0.1/in) |
IM/X40 -
Close ⊗
| I Series Model (xx=stroke in inches) |
Nominal Frame Size Inch (mm) |
Screw Lead Inch (mm) |
Force at 1 Million Inches (25.4 Million mm) of Travel lbf (kN) |
Speed at Max Rated RPM in/sec (mm/sec) |
Dynamic Load Rating lbf (N) |
Max Allowable Input Torque lbf-in (N-m) |
Force at Max Allowable Input Torque lbf (kN) | Max Rated Input RPM |
|---|---|---|---|---|---|---|---|---|
| IM40-xx01 | 4 (102) |
0.1 (2.54) |
2843 (12.6) |
5 (127) |
6124 (27241) |
78.9 (8.9) |
3966 (17.6) |
3000 |
| IM40-xx02 | 4 (102) |
0.2 (5.08) |
2546 (11.3) |
10 (254) |
4353 (19363) |
157.8 (17.8) |
3966 (17.6) |
3000 |
| IM40-xx05 | 4 (102) |
0.5 (12.7) |
2534 (11.3) |
25 (635) |
3193 (14203) |
157.8 (17.8) |
1586 (7.1) |
3000 |
| IM40-xx08 | 4 (102) |
0.75 (19.05) |
2954 (13.1) |
37.5 (952) |
3251 (14461) |
157.8 (17.8) |
1058 (4.7) |
3000 |
| IX40-xx01 | 4 (102) |
0.1 (2.54) |
3940 (17.5) |
5 (127) |
8488 (37757) |
107.4 (12.1) |
5399 (24.0) |
3000 |
| IX40-xx02 | 4 (102) |
0.2 (5.08) |
4966 (22.1) |
10 (254) |
8492 (37774) |
214.2 (24.2) |
5383 (23.9) |
3000 |
| IX40-xx05 | 4 (102) |
0.5 (12.7) |
4945 (22.0) |
25 (635) |
6230 (27712) |
214.2 (24.2) |
2153 (9.6) |
3000 |
| IX40-xx08 | 4 (102) |
0.75 (19.05) |
5763 (25.6) |
37.5 (952) |
6343 (28215) |
214.2 (24.2) |
1436 (6.4) |
3000 |
| IM 40 / IX 40 | |
|
Nominal Backlash inch (mm)
|
.008 (.2) / .004 (.1) |
|
Lead Accuracy in/ft (mm/300mm)
|
.001 (.025) |
|
Maximum Radial Load lb (N)
|
45 (200) |
|
Environmental Rating: Standard
|
IP54S / IP65S |
| Weights | lb (kg) |
|
Base Unit - Zero Stroke
|
14.6 (6.6) |
|
Adder per inch of stroke
|
1.31 (.6) |
|
Adder for inline (excluding motor)
|
0.2* (.09) |
|
Adder for gearset
|
9.91 (4.5) |
|
Adder for front flange
|
2.6 (1.2) |
|
Adder for parallel drive (excluding motor)
|
11.7** (5.3) |
|
Adder for 2 trunnions
|
2 (.91) |
|
Adder for 2 side mounts
|
2.69 (1.2) |
|
Adder for 2 adjustable flanges
|
4.28 (1.94) |
|
**For Nema motor size matching actuator size (I40 adder for Nema 34 = 7.3)
|
|
|
*For Nema motor size matching actuator size
|
|
| lbf-in-sec2 (kg-cm2) | |
| Base Unit - Input Drive Shaft Only | 0.00145 + 0.000073/in (1.65 + 0.0823/in) |
| Inline Unit - w/Motor Collar Clamp | 0.002 + 0.000073/in (2.15 + 0.0823/in) |
| 5:1 Gearhead - w/Motor Collar Clamp | 0.0045 + 0.000003/in (5.11 + 0.00329/in) |
| 10:1 Gearhead - w/Motor Collar Clamp | 0.0034 + 0.0000007/in (3.87 + 0.000823/in) |
| 1:1 Reduction Parallel Drive, 3 inch motor | 0.0023 + 0.000073/in (2.67 + 0.082/in) |
| 2:1 Reduction Parallel Drive, 3 inch motor | 0.00073 + 0.000018/in (0.83 + 0.02/in) |
| 1:2 Speed Up Ratio Parallel Drive, 3 inch motor | 0.011 + 0.00029/in (12.6 + 0.34/in) |
| 1:1 Reduction Parallel Drive, 4 inch motor | 0.021 + 0.000073/in (23.9 + 0.082/in) |
| 2:1 Reduction Parallel Drive, 4 inch motor | 0.0082 + 0.000018/in (9.27 + 0.020/in) |
| 1:2 Speed Up Ratio Parallel Drive, 4 inch motor | 0.039 + 0.00029/in (44.4 + 0.33/in) |
I Series Actuators
Series Options
IP Ratings for Exlar Actuators
The standard IP rating for Exlar actuators is IP54S or IP65S. Ingress protection is divided into two categories: solids and liquids. For example, with IP65 the three digits following IP represent different forms of environmental influence.
- The first digit represents protection against ingress of solid objects.
- The second digit represents protection against ingress of liquids.
- The suffix digit represents conditions of motion during the test.
Digit 1 - Ingress of Solid Objects
The IP rating system provides for 6 levels of protection against solids.
|
1 |
Protected against solid objects over 50mm e.g. hands, large tools. |
|
2 |
Protected against solid objects over 12.5mm e.g. hands, large tools. |
|
3 |
Protected against solid objects over 2.5mm e.g. wire, small tools. |
|
4 |
Protected against solid objects over 1.0mm e.g. wires. |
|
5 |
Limited protection against dust ingress (no harmful deposit). |
|
6 |
Totally protected against dust ingress. |
Digit 2 - Ingress of Liquids
The IP rating system provides for 9 levels of protection against liquids.
|
1 |
Protected against vertically falling drops of water or condensation. |
|
2 |
Protected against falling drops of water, if the case is disposed up to 15 from vertical. |
|
3 |
Protected against sprays of water from any direction, even if the case is disposed up to 60 from vertical. |
|
4 |
Protected against splash water from any direction. |
|
5 |
Protected against low pressure water jets from any direction. Limited ingress permitted. |
|
6 |
Protected against high pressure water jets from any direction. Limited ingress permitted. |
|
7 |
Protected against short periods of immersion in water of 1m or less for 30 minutes or less. |
|
8 |
Protected against long, durable periods of immersion in water. |
|
9 |
High-presure, high-temperature wash-down applications. |
Suffix
|
S |
Device standing still during test |
|
M |
Device moving during test |